Ender-3 Heated Bed spring steel plate
Attention:
Due to the size of the product is huge. In order to control the strength of the bend. We maintain a relatively thin thickness. So it is not flat when it is not magnetically adsorbed. When it is placed in a magnetic bed, it will be magnetically adsorbed so that it will automatically flatten.
Wipe the print surface before and after a print with isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength. As with any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface. If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed.
B plate with 3M adhesive, stick on the build surface.
Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is not suitable for ABS . if set heated beyond 80 degree, it 's magnetism will be weaker.
PLA: Cama Caliente:50-60℃
Nozzle:200-210℃
ABS: Cama Caliente::55-70℃
Nozzle:240-250℃
PETG: Cama Caliente:55-70℃
Nozzle:240-250℃
Carbon fibre: Cama Caliente:50-60℃
Nozzle:200-220℃
TPU: Cama Caliente:50-60℃
Nozzle:200-220℃
Wood: Cama Caliente:50-60℃
Nozzle:200-220℃
Copyright © 2019 Guangzhou Weyes Network Technology Co., Ltd. | All Rights Reserved