TL-touch is a fully automatic universal 3D printer hot bed calibration probe (fully automatic leveling probe).
The advantages are simple, compact, high precision and good compatibility,Can be compatible with all bed materials such as glass, metal, acrylic plastic wood
AwayIs an auto leveling -TL-touch sensor for 3D Printers based on open-source.
Simple, Smart, High-precision,Could work with any kinds of bed materials such glasses as woods metals and so on. It.
Connection Wiring:
TL-touch connection
A foot control and I/O (hardware or software PWM signal)
A I/O foot sensing probe signal (typically Zmin)
GND and +5V (500MA)
Away
Support the steering gear and Zprob firmware Repeiter Smoothieware Marlin, etc.
-TL-tCan be operated in the following condition. ouch
-I/O for control One (or Software PWM PWM)
-I/O for Zmin One (Probe Z)
And +5V power -GND
Packaging Content Pack:
TL-touch probe X1
M2.5 screw X3
M2.5 nut X3
DuPont terminal X5
DuPont plastic shell
DuPont double headed male pin 5PX2
10K resistance X1 (adaptive 3.3V logic level)
240 resistance X1 (adaptive 3.3V logic level)
Away
-1 XTL-touch
Parts for - just in case something -Spare happens
1 3Pin X Straight Pin
1 2Pin X Straight Pin
2 Screw & X & Washer & Nut
2 Dupont X Housing Shell 3Pin
2 Dupont X Housing Shell 2Pin
Dupont Terminal 10X
1 10K X 1/8W Resistor for Smoothieboard
1 X 240 1/8W Resistor for 3.3V?? Logic Level - added JULY 1